Accessing the Knowledge Center effectively requires a simple, one-time registration.
Search Results (17)
Webinar: Automating Fault Classification with Cyber-Physical Modeling
Automotive Intrusion Detection System (IDS) alerts are uniquely difficult to investigate. As vehicles age, IDS rules may be triggered by fluctuating sensor and actuator responses, unintended electrical events, Diagnostic Trouble Codes (DTCs), repairs, and more. To properly analyze cyber events caused by diagnostic faults, Security Operation Center (SOC) managers must hire more and higher-skilled analysts, which could increase costs.
What are the skills needed to tell a fault from a hack? How can a Security Operation Center (SOC) analyst find a true security event amongst a sea of anomalies triggered by diagnostic faults? And what special tools can be built into a SOC to reduce the burden on SOC analysts?
In this webinar, we will explore:
The challenges and techniques of fault analysis in automotive cyber security
How cyber-physical modeling can help distinguish faults from intrusions
How vehicle SOCs can incorporate fault analysis to better automate triage
Webinar: Achieving Emission Compliance with Secondary Air Injection
In this resourceful webinar, we will delve into the impactful role of secondary air injection systems and explore how they contribute to cleaner and more efficient engine performance.
Secondary air injection (SAI) is one of the most promising technical solutions for reducing cold-start emissions and helping our customers meet future emissions regulations. Currently, low-power systems are used that only allow catalyst heating at low engine loads. However, electrically assisted boost systems are needed for dynamic boundary conditions.
The recent measurement campaign at Garrett corroborates simulation studies performed in the past, reinforcing the potential of SAI systems with electric boosting to meet and exceed upcoming emission regulations.
Webinar key takeaways:
Find out about electric boosting devices as tools to promote emission compliance
Discover how electric boosting devices improve engine performance and can reduce cold start emissions.
Webinar: Novel boosting solutions for H2-ICE
As the automotive industry strives for reduced CO2 and navigates stringent emissions regulations, a promising alternative powertrain technology is emerging – the hydrogen internal combustion engine (H2-ICE).
Under ultra-lean operating conditions (Lambda >2,5), the H2-ICE produces almost no NOx emissions. This creates challenging requirements for the charging system but also allows the industry to offer ICE powertrain alternatives from their existing industrial base and supply chain at zero CO2 and ultra-low NOx tailpipe emissions.
In this free webinar, Firat Akar and Petr Pribyl of Garrett Motion explain how innovative turbo technologies can address each segment and group of applications by utilizing dedicated, high-efficiency aerodynamics in single or multistage systems and electrically assisted boosting.
Watch this webinar and learn more about:
Explore the potential of different charging concepts under ultra-lean conditions for steady-state and transient operation
Understand the demanding requirements on the compressor side and discover how Garrett is advancing turbo technologies to meet these challenges through high-efficiency aerodynamics and multistage machines
Gain insight into the intricacies of optimizing the turbine system for hydrogen combustion engines, addressing the lower enthalpy available in exhaust gas compared to diesel engines of similar power density
Learn about innovative electrically assisted boosting solutions that harmonize with traditional methods, pushing the boundaries of H2-ICE performance and transient characteristics
Webinar: Safeguarding Automotive Ethernet Networks
The adoption of Automotive Ethernet in vehicles has been rapidly increasing, showcasing its versatility as a reliable and proven communication technology. However, its broad implementation introduces many cybersecurity vulnerabilities, both from within and outside the vehicle.
In this free webinar, Garrett Motion’s George Olaru and Andrei Sin analyze current and future network architectures and explore the cybersecurity solutions in use, assessing their scope and advantages. The experts will also examine how well these solutions align with the regulations and showcase a cybersecurity analysis flow that adds value in case of a real cyber-attack on the vehicle.
Watch this webinar and learn more about:
Understand current and future Automotive Ethernet network architectures
Gain insight into the spectrum of cybersecurity threats, both internal and external
Explore available security solutions and mitigation strategies
Learn about the broader implications of incidents, distinguishing between false and true positives
Find out about the UN R155 regulation scope and applicability
Discover how to achieve cyber resilience by going beyond standard compliance.
Webinar: Data-Driven Configuration for Automotive IDS
As vehicles have become more interconnected and software-defined, attack surfaces have become bigger and more complex. In recent years, a range of vehicle intrusion techniques have jumped from theoretical concerns to real-world financial liabilities for OEMs. In this environment, intrusion detection systems (IDS) are an essential element of a secure automotive platform.
Data-driven models are an effective way to configure an IDS for a large variety of complex vehicle architectures. But the effectiveness of an IDS is disproportionately correlated to the quality of the data used to develop a model of vehicle network traffic. In this online webinar, we explore the unique challenges of data-driven IDS configuration and more about the present and future of automotive IDS. Watch this webinar and learn more about:
Complex data ecosystems: Investigate the intricacies of handling vast amounts of data from a variety of sources
Reducing false positives: Understanding the disproportionate cost of false positives anomaly alerts and how to prevent them
Vehicle variants: building robust models that support multiple configurations
The potential and drawbacks of intelligent systems in automotive IDS.
Webinar – Secure Connected Vehicle Fleets with Garrett’s Adaptable and Multi-Network IDS
Throughout this free 1-hour webinar, Garrett software engineers present the company’s class-leading Intrusion Detection System (IDS) software, how it integrates across multi-network environments, and application processor “detection-isolation-report-response” algorithms.
Garrett is an automotive technology leader, serving vehicle manufacturers worldwide for more than 65 years. Garrett’s cutting-edge technology enables vehicles to become cleaner, more efficient, and connected.
Webinar – Garrett Cybersecurity Ecosystem
Garrett Motion has recently participated in the Auto-ISAC Partner Day and presented an overview of our cybersecurity solutions and the Garrett cybersecurity software ecosystem for automotive industry.
Garrett is an automotive technology leader, serving vehicle manufacturers worldwide for more than 65 years. Garrett’s cutting-edge technology enables vehicles to become cleaner, more efficient, and connected.
Webinar – Discover How Model Predictive Controls Can Accelerate Fuel-to-Electrification Transition
In the complex world of powertrain development, and sometimes contradictory performance objectives, Model Predictive Control offers a pathway to system optimization, enabling auto manufacturers to manage the demands of sensors, actuators and constraints in an automated, multivariable approach.
Webinar – Stay Ahead of Hackers with Garrett’s Adaptable, Multi-Network Vehicle Intrusion Detection System
In this webinar, Garrett presents its best-in-class Intrusion Detection System (IDS) software, integrating multi-network and application processor detection-isolation-report-response algorithms. Garrett IDS is an adaptable hardware-independent solution providing highly accurate anomalies detection for CAN and Ethernet networks combined with advanced analytics cloud-based tools allowing OEMs to monitor entire fleets.
Webinar – The Smallest CV VNT Developed for Euro VI and Japan PPNLT
Watch this webinar and discover how the smallest Commercial Vehicle Variable Nozzle Turbocharger, GEN 3 GT17 DAVNT has been designed to meet our customer’s requirements referring to EURO VI & Japan PPNLT regulations.
Webinar – Maturity and Functionality of Electrified Boosting
Learn how Garrett’s differentiated electric boosting technology works and how it can help enhance fuel efficiency in off-highway equipment, especially tractors. This webinar provides you with an overview of Garrett’s capabilities in enabling off-highway tractors to be smarter, more efficient and performance ready. You will also learn about the trends and opportunities for hybrid boosting systems to enable better emission controls and energy management.
