How To Size Charge Air Tubing
The duct diameter should be sized with the capability to flow approximately 200 – 300 ft/sec. Selecting a flow diameter less than the calculated value results in the flow
Learn moreTurbocharger Water Cooling – Thermal Siphoning
Water cooling is a key design feature for improved durability and we recommend that if your turbo has an allowance for water cooling, hook up the water lines. Water
Learn moreTurbocharger Oil Drainage
In general, the larger the oil drain, the better. However, a -10AN is typically sufficient for proper oil drainage
Learn moreTurbo Oil Restrictors & Oil Supply
An oil restrictor is recommended for optimal performance with ball bearing turbochargers. Oil pressure of 40 – 45 psi at maximum engine speed is recommended to prevent damage to
Learn moreAir Filter Selection For Your Turbo
It is important to appropriately size the air filter for the maximum flow rate of the application. A target face velocity of ≤130 ft/min at redline is used to
Learn moreTroubleshooting Garrett Turbochargers
Turbocharger problems are the result of a handful of causes. Do you know them? Well, maybe not. That’s when Garrett is coming to the rescue
Learn more