string(5) "13497"

GTX5544R GEN II Turbocharger 106MM

Horsepower: 1400 - 2850

Displacement: 3.0L - 12.0L

Features

  • GEN II AERODYNAMICS FEATURE INCREASED HORSEPOWER RANGE
  • 106mm COMPRESSOR INDUCER 144 COMPRESSOR EXDUCER
  • 112MM TURBINE INDUCER | 102MM TURBINE EXDUCER
  • FLOWS UP TO 258 LBS/MIN | 2850 HORSEPOWER
  • NEW FULLY-MACHINED SPEED SENSOR PORT
  • IMPROVED PORTED SHROUD DESIGN FOR SURGE RESISTANCE
  • LIGHTWEIGHT BILLET BACKPLATE
  • SFI SUPERCORE AND TURBINE OPTIONS AVAILABLE
  • V-BAND COMPRESSOR OUTLET CONFIGURATION
  • (NEW) BACKPLATE TO COMPRESSOR HOUSING O-RING
  • 106MM SUPERCORE PN: 851285-5022S

WARNING: Maximum allowable turbocharger speed is 74.5krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

 

Buy now

IMPORTANT PRODUCT INFORMATION

“Garrett Performance Kits are professional aftermarket products only designed for certain racing vehicles driven on particular racing tracks and shall only be used on racing vehicles that will never be driven on public roads or highways. Garrett Performance Kits are not legal for the use in vehicles on public roads or other roads to which public road law applies. Any vehicle modifications using Garrett Performance Kits are AT YOUR OWN RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits in compliance with all applicable laws, regulations, and ordinances (including but not limited to emission, noise, operating license, performance, safety, and type-approval aspects). A vehicle modification using Garrett Performance Kits may particularly affect or void a vehicle’s warranty, operating license or type-approval. Moreover, only use Garrett Performance Kits in compliance with all applicable racing and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to ensure that your Garrett Performance Kit fits your vehicle and area of application. YOU MUST ENSURE LAWFUL AND SAFE OPERATIONS AT ANY TIME. You should particularly consult the owner’s manual and service manual of your vehicle. You should also contact your vehicle’s manufacturer to determine what effects modifications may have on important aspects such as safety, warranty, performance, etc. Only install and use Garrett Performance Kits if you have fully read and understood this important safety information and if you fully agree with the terms and conditions set forth therein.”

Learn More About Other Racer Vehicle Setups

 

April 4, 2022

Gray’s Racing’s “2NASTI” 2,000+ HP 1969 Chevy Camaro Gets it Done with a 102mm Garrett Turbo

Making 2,000+ horsepower with its single 102mm Garrett turbo, Gray’s Racing’s “2NASTI” 1969 Camaro dominates the drag strip.

October 15, 2019

Moran Race Engines Rotates The Earth With This 5300 Horsepower Hemi Race Engine

Mike Moran builds some extreme racing engines for race cars. This 670 cubic inch hemi cranked out 5300 horsepower on the engine dyno!

April 7, 2020

World’s First 1000 Horsepower AWD Billet 4 Rotor RX7

Rob Dahm has staked his claim and built the world’s first 1000 horsepower AWD (all-wheel drive) billet 4 rotor RX7! Rob has been on a…

September 15, 2019

Drag Radial Standout Josh Klugger Builds New 1967 Mustang Fastback

Radial racer Josh Klugger builds a new race car to dominate the radial vs world class. the twin turbo powered Pro Line Hemi, is ready to roar with it’s 4700 horsepower.

September 19, 2019

The Fastest Radial Drag Car In The World With 4690 Horsepower

Jason Carter and Mark Micke are two of the biggest names in drag racing and current world record holders with 221 MPH in the 1/8th mile! Garrett GTX5533R

September 1, 2019

World Series of Pro Mod Winner Carl Stevens Jr Makes 4600 Horsepower On GTX5533R Turbos

Carl Stevens Pro Modified drag race car gets on the dyno to show how much power it takes to be one of the quickest and fastest cars on the track today. His XRE engine combined with Garrett GTX5533R Gen II turbos made 4615 horsepower!

GTX5544R GEN II 106mm

Reference Data

GTX5544R GEN II Compressor Turbine
HP: 1400-2850              Disp: 3.0L-12.0L Inducer Exducer Trim A/R Inducer Exducer Trim
Supercore PN
851285-5021S 102mm 144mm 50 0.96 112mm 102mm 84
851285-5022S 106mm 144mm 54 0.96 112mm 102mm 84
Turbine Kits: GTX55 PN A/R Inlet Outlet Wastegate Divided
Interchangeable with GT|GTX 5533 5544 Supercores

* Long outlet with cross bolts

*761208-0062 1.24 V-Band V-Band Free Float N
*761208-0063 1.40 V-Band V-Band Free Float N
761208-0064 1.24 V-Band V-Band Free Float N
761208-0065 1.40 V-Band V-Band Free Float N
761208-0015 1.12 T6 V-Band Free Float N
761208-0025 1.24 T6 V-Band Free Float N
761208-0017 1.40 T6 V-Band Free Float N

GTX5544R GEN II 106mm

Download Section

 

File Name View
Compressor Map 102MM Inducer View
Compressor Map 106MM Inducer View
File Name Link View
Configuration Guide Download View
File Name Link View
Compressor Map Download View
Exhaust Flow Chart Download View
Product Photo Download View
Flange Diagram Download View
Speed Sensor Kit Installation Instruction Download View

GTX5544R GEN II 106mm

Compressor Map & Exhaust Flow Chart

Compressor Map

Exhaust Flow Chart

GTX GEN II: The Next Generation in Turbocharging Technology

Garrett Motion is excited to introduce the GTX5544R GEN II Turbocharger. The GTX GEN II is the next evolution of our GTX line with major updates and new technology. Updates include a compressor wheel aero update that gives it the ability to produce up to 20% more horsepower than the previous version.

Redeveloped Compressor Wheels

GTX GEN II compressor wheels were designed using proprietary Garrett Motion computer simulation technology focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger.

Each GTX GEN II turbocharger can create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle. The 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability through its reduction in shaft motion.

Fully-Machined Inlet, Outlet and Shroud

The GEN II GTX Series Turbochargers feature a fully-machined compressor inlet, fully-machined compressor outlet, and fully-machined ported shroud for precise and accurate tolerances.

Redesigned High-Flowing Compressor Housing

We also added a brand-new compressor housing featuring a high-flowing design matched perfectly for the new compressor wheel upgrade. GEN II compressor housings are not interchangeable with GEN I compressor wheels; however, all GEN II turbochargers are outline interchangeable with the equivalent GT and GTX GEN I products making a turbo swap easy to perform using all existing piping.

Fully-Machined Speed Sensor Port

The new compressor housings are equipped with a fully machined speed sensor port that accepts the Garrett Motion speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine-tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be removed using a 5mm Allen key when ready to install a speed sensor kit.

Cross Compatibility Turbo Turbine Housing Kit Platform

All GEN II GTX series turbochargers are compatible with all existing GT and GTX turbine housings kits. GEN II turbochargers are only offered through Garrett Motion authorized distribution centers.

Choose your path

Follow the journey of your preference, for more relevant information

I’m a vehicle owner

who needs to replace the turbo. Find a partner distributor in your area

I’m a performance enthusiast

Discover stunning engine tuning products

I’m an oem representative

Request information for your needs

I’m a distributor/garage

Start gaining recognition as a Garrett Turbo Installer

I’m interested in Garrett - Advancing Motion

Find out more information about our culture

Stay in touch

Subscribe