string(5) "13497"
Media Room - Press Releases
outubro 17, 2019

Garrett To Launch Industry’s First Electric Turbo

Tech Breakthrough Points to Accelerating Global Trend for Vehicle Hybridization

ROLLE, Switzerland, Oct. 17, 2019 – Garrett Motion Inc. (NYSE: GTX) is confirming its development of the world’s first “E-Turbo” for mass-market passenger vehicles expected to launch in 2021.

The announcement comes as automakers turn to electrified engine technology that meets industry challenges for increased energy efficiency and new regulatory emission targets while still meeting consumer demands for better vehicle performance and affordability. While Garrett’s first E-Turbo application will emerge in premium, high-performance vehicles, Garrett has 10 active programs in the three biggest auto markets in the world in varying vehicle segments.

Turbochargers use otherwise wasted exhaust energy that would go out the tailpipe to drive a turbine wheel connected via a shaft to a compressor wheel. The compressor wheel packs more air into the engine yielding the now familiar “turbo boost” to vehicle acceleration. This has allowed automakers to use smaller, more efficient engines helping to improve fuel efficiency and reduce carbon dioxide emissions without compromising performance.

Garrett’s E-Turbo keeps this basic concept but adds a small electric motor on the shaft between the two wheels, which allows two new things to happen.  First, the electric motor can spool up the turbo to provide boost immediately off idle, effectively eliminating the lag between the time a driver hits the accelerator and felt acceleration. Electrifying the turbocharger also removes the design constraints prioritizing turbine efficiency at low engine speeds to drive the compressor. The addition of electric power to compensate when air flow is low allows Garrett to use a larger turbo more appropriately matched to engine’s natural sweet spot of operation.

Second and most exciting to the future of hybridization across vehicle segments, the E-Turbo can electrically recuperate spent –and otherwise wasted–exhaust energy by using a small electric motor to generate electricity and recharge the hybrid battery.  This ability to be an onboard provider of electricity opens up options for automakers in designing hybrid powertrains.

Garrett’s E-Turbo Gas Case Study

Garrett has been collaborating with a global automaker and other industry suppliers to demonstrate the capabilities of this new technology. Presenting at a conference in Germany earlier this year, Garrett engineers spoke to several testing processes that resulted in the E-Turbo outperforming the smaller current production turbo at all speeds. Most impressive was at low engine speeds (1500 rpm) where target torque was reached in 1 second vs 4.5 seconds in the current production model.

Overall, results indicated the E-Turbo has the potential to improve basic engine performance in a manner consistent with future legislation requirements for fuel economy and emissions. In Garrett’s case study, rated power increased 16%, torque increased 10.5%, and the time to go from 60 to 100 km/h improved from 11 sec to 8.8 sec (-25%).

Next Generation Software

New Garrett software is also supporting the performance and fuel efficiency potential of E-Turbo systems by integrating boost control algorithms in existing Engine Control Modules (ECMs). Garrett’s software additions contribute to optimized turbo boost, torque, efficiency, and emissions performance. In addition, it also employs prognostic and smart diagnostic functionality to monitor the health status of the entire air loop within the vehicle as OEMs focus on all aspects of powertrain design to meet increasingly more stringent environmental standards.

Garrett’s software redefines conventional ECM and mechanical turbo interaction by creating a new control subsystem for the E-Turbo. The ECM partner prepares the integration environment – including the interface and memory allocation – allowing Garrett engineers to apply control code into the ECM and enable the customer to calibrate the boost strategy independently.

Energy management is one of the key building blocks developed by Garrett on a technology pathway leading to predictive energy management and powertrain optimization as well as vehicle health management. Garrett’s proven world-class expertise in handling multivariable controls addresses the added complexity of introducing electrical energy into the vehicle and creating a more complex system with multiple objectives.

# # #

Media Contact:   
Mike Stoller
+1 734-392-5525
michael.stoller@garrettmotion.com

About Garrett Motion Inc.

Garrett (www.garrettmotion.com) is a differentiated technology leader, serving customers worldwide for more than 65 years with passenger vehicle, commercial vehicle, aftermarket replacement and performance enhancement solutions. Garrett’s cutting-edge technology enables vehicles to become safer, and more connected, efficient and environmentally friendly. Our portfolio of turbocharging, electric boosting and automotive software solutions empowers the transportation industry to redefine and further advance motion. For more news and information on Garrett, please visit www.garrettmotion.com/news

Choose your path

Follow the journey of your preference, for more relevant information

I’m a vehicle owner

who needs to replace the turbo. Find a partner distributor in your area

I’m a performance enthusiast

Discover stunning engine tuning products

I’m an oem representative

Request information for your needs

I’m a distributor/garage

Start gaining recognition as a Garrett Turbo Installer

I’m interested in Garrett - Advancing Motion

Find out more information about our culture

Stay in touch

Subscribe