string(5) "13497"
Filters

Accessing the Knowledge Center effectively requires a simple, one-time registration.

Everything You Need To Know About Garrett GVW Wastegates

Kendall Samuel and Mary Abigail Barker started Mechanical Advantage Racing together in March of 2021. The two provide an array of mechanical and fabrication services for racing and performance vehicles, and marketing services (including the photos and video seen here). In addition, they both campaign their own race cars. Combined they have a wealth of racing and performance knowledge.

In this video Kendall, unboxes two of the GVW wastegates (GWV-40 GVW-45), talks about the features, and all of the components that come in the boxes. Watch as Kendal talks about the wastegates, wastegate spring pressures, fittings, v-bands and more, and Mary shows you how to install them.

 

Flow Data

Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Here’s how the three GVW wastegate sizes flow in LBS/MIN and KG/SEC at various increments of the valve stroke.

Material Data

The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency.

  • Valve Housing: High temp stainless steel rated up to 1050° C
  • Diaphragm: High temp Nomex reinforced elastomer
  • Actuator Cover: Fully-machined anodized 6061 aluminum
  • Valve Guide | Bushing: Nitronic 60
  • Valve: high temp stainless steel with plated stem
  • V-Band: CNC machined 304 stainless steel
  • Flanges: Fully-machined 304 stainless steel
  • Springs: 17/7 PH stainless steel

Mechanical Data

Garrett Vent | External Wastegates are created by the engineers that designed G-Series and GTX Gen II turbochargers. Available in three sizes: 40mm | 45mm | 50mm

  • Valve Diameter: 40mm | 45mm | 50mm
  • Valve Mass: (40mm)1.27kg | 45oz (45mm) 1.47kg | 52oz (50mm) 1.56kg | 55oz
  • Max Spring Base Pressure: 1.7 bar | 25 psi (1:1 backpressure ratio)
  • Minimum Spring Base Pressure: 0.2 bar | 3 psi (1:1 backpressure ratio)
  • Port Fitting | Air: M10x1.0 to hose barb (hose ID 6mm | .25in)
  • Port Fitting | Water: M8x1.0 to AN-3

Wastegate Flange Specs

GVW Wastegate flanges can be references in this data:

  • GVW-40: Inlet OD 55.4mm | 2.18in Outlet OD 48.9mm | 1.93in  (Interchangeable with Tial MV-S)
  • GVW-45: Inlet OD 63.5mm | 2.50in Outlet OD 55.4mm | 2.18in  (Interchangeable with Tial MV-R)
  • GVW-50: Inlet OD 68.0mm | 2.68in Outlet OD 63.5mm | 2.50in  (Interchangeable with Turbosmart Gen V ProGate 50)

Wastegate Springs

GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI – 1.7 Bar | 24.7 PSI (considering 1:1 backpressure).

Use the chart to reference wastegate size and spring color to identify Garrett GVW wastegate spring pressures

See Other Relevant Content from Knowledge Center

Unlock peak performance with genuine Garrett turbochargers and accessories. Purchase directly from factory-authorized distributors to elevate your engine’s power and efficiency shop.garrettmotion.com
Have you ever wondered how long extended tip compressor wheels have been used or why they are used in modern turbochargers? The extended tip compressor…
Garrett released the G-Series G47 and G50 turbochargers. This adds 6 new supercore configurations to the G-Series lineup. Click to read more about these large…
What is a turbo wastegate and how does it work? What is is an internal wastegate vs an external wastegate? How do you select the…
Garrett GVW Wastegates have a water-cooling circuit which allows the product to be operated in extremely high temperature conditions while maintaining its actuation characteristics.
Interested in learning how to replace external wastegate springs to calibrate various spring pressures? Follow along with the step by step process or follow the…
Interested in learning how to replace an external wastegate diaphragm? Follow along with the step by step process or follow the video to learn more.…