string(5) "13497"

GARRETT G25-660 54mm Reverse Rotation

Horsepower: 350 - 660

Displacement: 1.4L - 3.0L

Features

  • G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP
  • 54mm TURBOCHARGER COMPRESSOR WHEEL
  • 79% MAXIMUM COMPRESSOR EFFICIENCY
  • MAR-M ALLOY TURBINE WHEEL RATED UP TO 1050° C
  • NEW TURBINE AERO PROVIDES HIGHER FLOW AND EFFICIENCY
  • STAINLESS STEEL TURBINE HOUSINGS RATED UP TO 1050° C
  • OIL RESTRICTOR AND WATER FITTINGS INCLUDED
  • FULLY MACHINED SPEED SENSOR AND PRESSURE PORTS
  • TURBOCHARGER ASSEMBLIES ARE CALIBRATED WITH A 0.5 BAR ACTUATOR
  • Read About Turbo System Optimization: A guide to setting up your turbocharger

WARNING: Maximum allowable turbocharger speed is 185krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

Buy now

IMPORTANT PRODUCT INFORMATION

“Garrett Performance Kits are professional aftermarket products only designed for certain racing vehicles driven on particular racing tracks and shall only be used on racing vehicles that will never be driven on public roads or highways. Garrett Performance Kits are not legal for the use in vehicles on public roads or other roads to which public road law applies. Any vehicle modifications using Garrett Performance Kits are AT YOUR OWN RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits in compliance with all applicable laws, regulations, and ordinances (including but not limited to emission, noise, operating license, performance, safety, and type-approval aspects). A vehicle modification using Garrett Performance Kits may particularly affect or void a vehicle’s warranty, operating license or type-approval. Moreover, only use Garrett Performance Kits in compliance with all applicable racing and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to ensure that your Garrett Performance Kit fits your vehicle and area of application. YOU MUST ENSURE LAWFUL AND SAFE OPERATIONS AT ANY TIME. You should particularly consult the owner’s manual and service manual of your vehicle. You should also contact your vehicle’s manufacturer to determine what effects modifications may have on important aspects such as safety, warranty, performance, etc. Only install and use Garrett Performance Kits if you have fully read and understood this important safety information and if you fully agree with the terms and conditions set forth therein.”

Learn More About Race Vehicle Setups

4월 17, 2020

Adam LZ’s JZX100 Toyota Chaser

The JZX100 or Toyota Chaser is a mid-size four door sedan in right hand drive configuration with a 1JZ turbocharged engine. Manufactured in Japan from…

5월 8, 2020

Zeroy: 837 Horsepower Twin Turbocharged 370Z

What do you get when you combine Adam LZ, with twin turbos, and a 370Z with a VQ engine? A flame shooting, tire burning, high…

8월 15, 2019

Turbocharging At Elevation

A naturally aspirated combustion engine will lose 3% of its power for every 1,000 ft of elevation gain. Add a Garrett turbocharger to minimize the loss

5월 8, 2020

Adam LZ: 480 horsepower Frappuccino Themed S13

  We all have our first car or know what our first car will be and all the things we want to do to it…

4월 24, 2023

How To Select A Turbo Part 1

With over 35 Garrett turbos to choose, how do you select the right one? This provides some insight into the complicated process.

10월 2, 2019

Turbo Tech: The Difference An A/R Makes Going From .83 To 1.01 With A GTX3076R Gen II Turbo

Ever wondered what A/R stands for and how it affects turbo performance? This explains the basic concepts of the theory with dyno data to show the results

1월 29, 2020

Garrett Performance Intercoolers

Performance Intercoolers Garrett performance intercoolers and intercooler cores work together with the turbocharger as part of the total induction system. When air is compressed in…

7월 11, 2019

Racing At Altitude With The BBi Autosport Porsche Hill Climb Car!

The Garrett Motion twin turbocharged BBi Autosport Porsche 911 Pikes Peak hill climb car completed the event with an impressive 2nd place overall as well…

11월 5, 2019

Chris Forsberg’s 800 Horsepower Nissan 370Z Drift Monster

Chris Forsberg gives us a close up look at his 2019 Formula D Nissan 370Z. The twin turbocharged Nissan makes over 800 whp with twin Garrett G25-660 turbos

6월 30, 2020

G Series Turbo Technology Analysis: Motive Video

The G Series turbocharger lineup launched in 2018 with the G25-550 and G25-660 offerings, and in two years has grown to a nearly full product lineup that offers a 1500 horsepower range out of a mid-sized turbocharger. The G25, G30, G35, and G42 turbos are engineered to provide high flowing, high efficiency boost to engines up to 7.0L

9월 4, 2020

Pikes Peak Sub 10 Minute Club: Cole Powelson

A nearly flawless race, perfect weather conditions, and his turbocharged Sierra Alpha race car turned out to be the winning combination for this landmark accomplishment as Cole Powelson joins the 9 minute club in the 98th running of the Pikes Peak International Hill Climb.

5월 28, 2021

Reverse Rotation Turbochargers: A Unique Performance Configuration For Single and Twin Turbo Applications

Reverse rotation, mirrored turbos, symmetrical turbos, mirror image turbos are the many names that identify this counter clockwise rotating turbo configuration. Truth be told, there’s nothing uber special about them when compared to their standard rotation counterparts. However, the only parts they share are the bearing cartridge and some bolts and clamps

4월 12, 2022

The “Kendall Custom” 1967 Shelby Mustang is a 1,200+ HP Garrett Turbocharged Showstopping Stunner

Commissioned by Kendall Motor Oil to support a children’s charity, this Garrett turbocharged ‘67 Shelby Mustang is a stunner.

4월 12, 2022

Mechanical Advantage’s Menacing “Slumdog” Subaru Steals the Show on Track with Twin Garrett Turbos

Kendall Samuel of Mechanical Advantage Racing’s “Slumdog” Subaru Impreza steals the show on track with twin Garrett turbos.

G-Series G25-660 54mm Reverse Rotation

Reference Data

G25-660 Compressor Turbine
Inducer Exducer Trim A/R Inducer Exducer Trim
HP: 350-660 Disp: 1.4L-3.0L 54mm 67mm 65 .70 54mm 49mm 84
Turbo: Standard Rotation PN A/R Inlet Outlet Wastegate Divided
Assembled and calibrated with 0.5 bar actuator 877895-5002S 0.49 T25 V-Band Internal N
877895-5005S 0.72 V-Band V-Band Internal N
877895-5006S 0.92 V-Band V-Band Internal N
Turbo: Reverse Rotation PN A/R Inlet Outlet Wastegate Divided
See note above 877895-5009S 0.72 V-Band V-Band Internal N
877895-5010S 0.92 V-Band V-Band Internal N
Turbine Kits Standard Rotation PN A/R Inlet Outlet Wastegate Divided
Internal Wastegate Turbine Housing 740902-0076 0.72 V-Band V-Band Internal N
740902-0077 0.92 V-Band V-Band Internal N
740902-0080 0.49 T25 V-Band Internal N
Turbine Kits Reverse Rotation PN A/R Inlet Outlet Wastegate Divided
Internal Wastegate Turbine Housing 740902-0078 0.72 V-Band V-Band Internal N
740902-0079 0.92 V-Band V-Band Internal N
Supercore PN
Standard Rotation 858161-5003S
Reverse Rotation 871388-5002S
Turbine Kits Standard Rotation PN A/R Inlet Outlet Wastegate Divided
Free Float Turbine Housing 740902-0069 0.72 V-Band V-Band External N
740902-0068 0.92 V-Band V-Band External N
Turbine Kits Reverse Rotation PN A/R Inlet Outlet Wastegate Divided
Free Float Turbine Housing 740902-0073 0.72 V-Band V-Band External N
740902-0074 0.92 V-Band V-Band External N

G-Series G25-660 54mm Reverse Rotation

Download Section

File Name Link View
Configuration Guide Download View
File Name Link View
Compressor Map Download View
Exhaust Flow Chart Download View
Product Photo Download View
Flange Diagram Download View
Speed Sensor Kit Installation Instruction Download View

G-Series G25-660 54mm Reverse Rotation

Compressor Map & Exhaust Flow Chart

Compressor Map

Exhaust Flow Chart

The most powerful small frame turbocharger on the market

Introducing performance out of a package you never thought possible. This clean sheet product is tailored to meet the demands of hard core racing enthusiasts while providing industry leading power capability in a small package.

The G-Series G25-550 and the G25-660 turbochargers are compatible with 1.4L – 3.0L engine displacements and capable of producing up to 550 and 660 horsepower. G Series 25 turbochargers are smaller and outflow all comparable products on the market.

New compressor and turbine aero combined with high temperature resistant materials allowed engineers to push the limits of performance.

A new name designates a new generation of industry leading technology and innovation.

Understanding the Name:
G25-550 || G25-660

G designates 81 years of Garrett® heritage.

25 classifies the size of the frame. The remaining 3 digits identify the max horsepower rating of the turbocharger. (ie 550)

Compressor Aero

Forged fully-machined compressor wheel and new aerodynamics increase maximum horsepower output and boost response. The CFD (computational fluid dynamics) engineered compressor wheel increases air flow up to 15% for 60mm and 30% for 67mm with 79-80% efficiency. (Compared to GTX GenII)

Available in standard rotation and reverse rotation options for enthusiasts that want the perfect twin turbo installation or a single reverse rotation turbo for applications with installation restrictions.

Speed Sensor

The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.

The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing.
The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.

Center Housing

A new one-piece center housing and backplate increase durability and product safety by reducing the number of failure points associated with the turbocharger. The center housing to turbine housing v-band connection allows for 360 degree orientation when installing with Garrett® non-wastegated turbine housings.

Water Jackets

Four large water jacket ports increase cooling capacity and allow enthusiasts to customize water line routing to help improve the installation process. The turbocharger comes with two -6AN water fittings and two plugs.

*Recommended to install waterlines on opposite sides of the housing.

Oil Passage

A single stage oil passage directs pressurized oil to the new oil cavity ensuring proper bearing lubrication at both sides of the cartridge.

Each turbocharger includes (1) -4AN oil restrictor fitting with a 1mm orifice to provide the turbo with the recommended 40psi of oil pressure.

Rotating Group- twin piston rings

A shorter bearing cartridge allows us to incorporate twin piston rings on both sides of the shaft wheel assembly. This will reduce the likeliness of oil leakage at the seals from the center housing to the compressor and or turbine stage.

Turbine Wheel Aero

The turbine wheel features all new aerodynamics to improve flow and boost response. The new turbine wheel is made of Mar-M super alloy and is capable of handling exhaust gas temperatures up to 1050 degrees C.
The new turbine wheel flows 15-20% more than GTX and has peak efficiency of 74%.

Turbine Housings

All G Series Turbine housings are made from stainless steel to provide ultimate durability and temperature resistance up 1050 degrees C.
Internally wastegated housings are compact, efficient, and designed with maximum bypass port size to reduce boost creep and provide better boost control.
Turbine housings are available in a variety of wastegated and non-wastegated, open volute, T25 and Vband configurations so be sure to order the correct part for your application.

Choose your path

Follow the journey of your preference, for more relevant information

I’m a vehicle owner

who needs to replace the turbo. Find a partner distributor in your area

I’m a performance enthusiast

Discover stunning engine tuning products

I’m an oem representative

Request information for your needs

I’m a distributor/garage

Start gaining recognition as a Garrett Turbo Installer

I’m interested in Garrett - Advancing Motion

Find out more information about our culture

Stay in touch

Subscribe