string(5) "13497"

GTX3582R GEN II Turbocharger

Horsepower: 450 - 900

Displacement: 2.0L - 4.5L

Features

  • GEN II AERODYNAMICS FEATURE INCREASED HORSEPOWER RANGE
  • 66mm TURBOCHARGER COMPRESSOR OPTION
  • NEW FULLY-MACHINED SPEED SENSOR PORT
  • STANDARD AND REVERSE ROTATION OPTIONS AVAILABLE
  • DUAL CERAMIC BALL BEARING
  • WATER COOLED CENTER HOUSING

WARNING: Maximum allowable turbocharger speed is 130krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

Buy now

IMPORTANT PRODUCT INFORMATION

“Garrett Performance Kits are professional aftermarket products only designed for certain racing vehicles driven on particular racing tracks and shall only be used on racing vehicles that will never be driven on public roads or highways. Garrett Performance Kits are not legal for the use in vehicles on public roads or other roads to which public road law applies. Any vehicle modifications using Garrett Performance Kits are AT YOUR OWN RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits in compliance with all applicable laws, regulations, and ordinances (including but not limited to emission, noise, operating license, performance, safety, and type-approval aspects). A vehicle modification using Garrett Performance Kits may particularly affect or void a vehicle’s warranty, operating license or type-approval. Moreover, only use Garrett Performance Kits in compliance with all applicable racing and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to ensure that your Garrett Performance Kit fits your vehicle and area of application. YOU MUST ENSURE LAWFUL AND SAFE OPERATIONS AT ANY TIME. You should particularly consult the owner’s manual and service manual of your vehicle. You should also contact your vehicle’s manufacturer to determine what effects modifications may have on important aspects such as safety, warranty, performance, etc. Only install and use Garrett Performance Kits if you have fully read and understood this important safety information and if you fully agree with the terms and conditions set forth therein.”

Learn More About Turbos

 

2월 8, 2022

World Challenge Evolved: This Garrett Turbocharged Evo Gets a Second Shot at Life

When this Mitsubishi Evolution X was wrecked while serving in Pirelli World Challenge competition, Ravi Dolwani of CSF, Inc. picked it up and gave it a second shot at road racing glory with an all-new build and a heaping helping of boost thanks to a wicked Garrett turbo.

9월 14, 2020

Single OR Twin Turbo LS

What is the best setup for an LS engine? Is it a big single turbo or smaller twin turbos? Tune in for the details as we analyze the data from Pro 2 Formula Drift driver Jonathan Hurst’s 5.3L / 800WHP G37 drift machine.

7월 7, 2020

Pump Gas Vs E85: Tunable Performance For Your Turbo

Same car, same engine, same tuner, and same turbo combination (GTX2867R Gen II) and how E85 vs Pump Gas impact performance

10월 2, 2019

Turbo Tech: The Difference An A/R Makes Going From .83 To 1.01 With A GTX3076R Gen II Turbo

Ever wondered what A/R stands for and how it affects turbo performance? This explains the basic concepts of the theory with dyno data to show the results

9월 24, 2019

800 WHP Unlimited Front Wheel Drive Acura Integra Type R

Jim Houghton’s 800 WHP Unlimited Front Wheel Drive Acura Integra Type R is one of the fastest cars in Time Attack Racing. It’s 2.4L turbocharged engine is..

9월 11, 2019

Drift With George Kiriakopoulos In His Turbocharged 2JZ Powered Nissan 370Z

The GTX3582R Gen II is a great choice for the 2JZGTE engine because the (66 68 mm) compressor to turbine wheel combination provides big power and quick boost response. The power curve provides sufficient boost at a wide range of RPMs needed for drift events.

9월 3, 2019

Turbocharged 1.9L Honda Civic Makes 785 Horsepower With GTX3582R Gen II

Time Attack competitors are always chasing more horsepower while trying to maintain reliability and a useable power-band. Boersma’s car of choice is a 1999 Honda Civic with a 1.9L Honda B Series turbo engine that cranks out 785 horsepower with a Garrett GTX3582R Gen II!

8월 2, 2019

One Fast Lap: Racing The Clock In Time Attack

One Fast Lap: Racing The Clock With The RS Motors Time Attack Racing Team This car is built for one thing- Time Attack Racing. Time…

3월 8, 2018

Jesse James Unveils His Dodge Polara

Garrett pairs up with Roadster Shop and the famous motorcycle builder on his 1500HP Hot Rod Car and motorcycle builder Jesse James unveiled his latest …

4월 24, 2023

How To Select A Turbo Part 1

With over 35 Garrett turbos to choose, how do you select the right one? This provides some insight into the complicated process.

4월 13, 2022

Making High Altitude Horsepower with Motion Auto’s 2JZ-Powered and Garrett Turbo S14 Nissan 240SX

By Ainsley Jacobs Motion Auto’s 2JZ-swapped and Garrett turbo-equipped S14 Nissan 240SX drift car makes great power at a high altitude.Sometimes project cars take on…

4월 13, 2022

Pac Performance’s FD3S Mazda RX7 Single Garrett Turbo Kit Delivers 500+ Wheel Horsepower

Developed by Pac Performance, this single turbo conversion kit for the FD3S Mazda RX7 uses a Garrett turbo to provide 500whp.

4월 5, 2022

Garrett Boost Gone Wild: Haltech’s Quad Turbo V12 LS is the Ultimate LS Engine

Haltech creates the ultimate Chevy LS engine with a V12 configuration and four Garrett GTX3582R ball bearing turbochargers.

4월 13, 2022

This 2JZ-Swapped S550 Ford Mustang Makes 550+ Horsepower With its Garrett Turbo

Motion Auto’s crazy Toyota 2JZ-swapped S550 Ford Mustang drift car makes 550+ horsepower with a Garrett GTX3582R turbo.

4월 13, 2022

ZWING’s Beater E30 BMW is Reborn as a Stunning Show Car with Garrett Turbocharged S52 Power

Zach Wingfield rebuilt his beater E30 BMW 325i as a stunning SEMA Show car with an S52 swap and potent Garrett GTX3582 turbo.

GTX3582R GEN II 66mm

Reference Data

GTX3582R GEN II Compressor Turbine
Inducer Exducer Trim A/R Inducer Exducer Trim
HP: 450-900  Disp: 2.0L-4.5L 66mm 82mm 64 0.70 68mm 62mm 84
Supercore Assembly Kit Turbine Kit A/R Inlet Outlet Wastegate Divided
851154-5004S 740902-0012 0.63 T3 V-Band Free Float N
856801-5068S 740902-0011 0.82 T3 V-Band Free Float N
740902-0010 1.06 T3 V-Band Free Float N
740902-0018 0.63 T4 V-Band Free Float N
856801-5071S 740902-0017 0.82 T4 V-Band Free Float N
740902-0016 1.06 T4 V-Band Free Float N
740902-0033 0.61 V-Band V-Band Free Float N
Assembly Kit PN Includes 856801-5080S 740902-0032 0.83 V-Band V-Band Free Float N
Supercore and Turbine Kit 856801-5079S 740902-0031 1.01 V-Band V-Band Free Float N

GTX3582R GEN II 66mm

Download Section

File Name Link View
Configuration Guide Download View
File Name Link View
Compressor Map Download View
Exhaust Flow Chart Download View
Product Photo Download View
Flange Diagram Download View
Speed Sensor Kit Installation Instruction Download View

GTX3582R GEN II 66mm

Compressor Map & Exhaust Flow Chart

Compressor Map

Exhaust Flow Chart

GTX GEN II: The Next Generation in Turbocharging Technology

Garrett Motion is excited to introduce the GTX3582R GEN II Turbocharger. The GTX GEN II is the next evolution of our GTX line with major updates and new technology. Updates include a compressor wheel aero update that gives it the ability to produce up to 20% more horsepower than the previous version.

Redeveloped Compressor Wheels

GTX GEN II compressor wheels were designed using proprietary Garrett Motion computer simulation technology focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger.

Each GTX GEN II turbocharger can create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle. The 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability through its reduction in shaft motion.

Fully-Machined Inlet, Outlet and Shroud

The GEN II GTX Series Turbochargers feature a fully-machined compressor inlet, fully-machined compressor outlet, and fully-machined ported shroud for precise and accurate tolerances.

Redesigned High-Flowing Compressor Housing

We also added a brand-new compressor housing featuring a high-flowing design matched perfectly for the new compressor wheel upgrade. GEN II compressor housings are not interchangeable with GEN I compressor wheels; however, all GEN II turbochargers are outline interchangeable with the equivalent GT and GTX GEN I products making a turbo swap easy to perform using all existing piping.

Fully-Machined Speed Sensor Port

The new compressor housings are equipped with a fully machined speed sensor port that accepts the Garrett Motion speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine-tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be removed using a 5mm Allen key when ready to install a speed sensor kit.

Cross Compatibility Turbo Turbine Housing Kit Platform

All GEN II GTX series turbochargers are compatible with all existing GT and GTX turbine housings kits. GEN II turbochargers are only offered through Garrett Motion authorized distribution centers.

Choose your path

Follow the journey of your preference, for more relevant information

I’m a vehicle owner

who needs to replace the turbo. Find a partner distributor in your area

I’m a performance enthusiast

Discover stunning engine tuning products

I’m an oem representative

Request information for your needs

I’m a distributor/garage

Start gaining recognition as a Garrett Turbo Installer

I’m interested in Garrett - Advancing Motion

Find out more information about our culture

Stay in touch

Subscribe