string(5) "13497"

GARRETT G42-1450 79MM

Horsepower: 525 - 1450

Displacement: 2.0L - 8.0L

Features

  • GARRETT G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HORSEPOWER
  • 79mm COMPRESSOR INDUCER | 98MM COMPRESSOR EXDUCER
  • 82MM TURBINE INDUCER | 75MM TURBINE EXDUCER
  • FULLY MACHINED SPEED SENSOR AND PRESSURE PORTS
  • NEW TURBINE WHEEL AERO FOR INCREASED EFFICIENCY AND FLOW
  • STAINLESS STEEL TURBINE HOUSINGS
  • WATER FITTINGS INCLUDED
  • G42-1450 SUPERCORE PN: 860778-5006S

WARNING: Maximum allowable turbocharger speed is 114krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

Buy now

IMPORTANT PRODUCT INFORMATION

“Garrett Performance Kits are professional aftermarket products only designed for certain racing vehicles driven on particular racing tracks and shall only be used on racing vehicles that will never be driven on public roads or highways. Garrett Performance Kits are not legal for the use in vehicles on public roads or other roads to which public road law applies. Any vehicle modifications using Garrett Performance Kits are AT YOUR OWN RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits in compliance with all applicable laws, regulations, and ordinances (including but not limited to emission, noise, operating license, performance, safety, and type-approval aspects). A vehicle modification using Garrett Performance Kits may particularly affect or void a vehicle’s warranty, operating license or type-approval. Moreover, only use Garrett Performance Kits in compliance with all applicable racing and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to ensure that your Garrett Performance Kit fits your vehicle and area of application. YOU MUST ENSURE LAWFUL AND SAFE OPERATIONS AT ANY TIME. You should particularly consult the owner’s manual and service manual of your vehicle. You should also contact your vehicle’s manufacturer to determine what effects modifications may have on important aspects such as safety, warranty, performance, etc. Only install and use Garrett Performance Kits if you have fully read and understood this important safety information and if you fully agree with the terms and conditions set forth therein.”

Learn More About Race Vehicle Setups

4月 24, 2023

How To Select A Turbo Part 1

With over 35 Garrett turbos to choose, how do you select the right one? This provides some insight into the complicated process.

4月 23, 2023

How To Select A Turbo Part 2: Calculations

Turbo any engine once you apply these calculations. Find the compressor that matches your inputs and you are on your way to turbocharging any engine

6月 12, 2020

Dylan Hughes Builds A 946 Horsepower E46 BMW

Dylan Hughes builds his BMW E46 Formula Drift competition car from the ground up with a 3.0L 2JZ power plant and Garrett G Series turbochargers. See the results of this 2JZ engine turbo test.

5月 29, 2020

Turbo Tech: Compound Turbo Systems

Compound turbo systems use different size turbos and operate in series where the first turbo feeds the second turbo boosted air and the effect is compounded

3月 18, 2022

Bulgarian-Built and Boosted 4-Cylinder AWD Audi S3 Drag Car Makes 1,250+ HP with Garrett

Built by Bulgaria’s Georgi Georgiev, this 4-cylinder AWD 2000 Audi S3 drag car makes 1,250+ horsepower with a G42-1450 Garrett turbo.

1月 24, 2022

Collete Davis’ 620 Horsepower 3 Rotor FC RX7

In 2016, Collete Davis started her first drift project: an FC RX7. Now it’s fitted with a Garrett Turbocharged 20B 3-Rotor

4月 13, 2022

Motion Auto’s Garrett Turbo K24-Powered AWD Honda Civic Makes 800+ Horsepower

Motion Auto built a sick K24-powered and AWD Honda Civic and pushed it to make 800+ horsepower with a Garrett turbo.

4月 13, 2022

The Skid Factory Builds One Bad Barra-Powered and Garrett-Boosted 1,100+ HP 7-Seater Sleeper Bedford Van

By Ainsley Jacobs Australia’s Skid Factory built a badass Barra-powered and Garrett-boosted 7-seater sleeper Bedford van with 1,100-horsepower. Australian ingenuity knows no limits. When The…

4月 12, 2022

FuelTech Finds and Restores This Ferrari F355 Then Ups the Ante with a Huge Garrett Turbo

Found in Atlanta, FuelTech restored this forgotten Ferrari F355 and enhanced its power with a Garrett G42-1200 turbo.

4月 13, 2022

The StanceWorks Honda K24-Swapped Ferrari 308 GTB Gets 1,000+ HP with a Garrett Turbo

StanceWorks brought this vintage 1981 Ferrari 308 GTBi into the modern era with a Honda K24 engine and massive Garrett turbo.

4月 12, 2022

Monsta Torque’s Barra-Powered FG Ford Falcon Ute is a 1,000+ HP Garrett Turbocharged Monster

Monsta Torque took this Ford Falcon FG F6 and transformed it into a 1,000+ hp monster with a Garrett turbo and Barra engine.

4月 5, 2022

This Garrett Turbo 700-HP Show-Stopping Ford F-100 Was Built as a Sentimental Tribute Truck

Jake Smith transformed his late uncle’s 1953 Ford F-100 into the ultimate showstopper with 700-horsepower from a Garrett G42.

G-Series G42-1450 79mm

Reference Data

G42-1450 Compressor Turbine
Inducer Exducer Trim A/R Inducer Exducer Trim
HP: 525-1450 Disp: 2.0L-8.0L 79mm 98mm 65 0.85 82mm 75mm 84
Supercore PN
Standard Rotation 860778-5006S
Turbine Kits: G42 PN A/R Inlet Outlet Wastegate Divided
Free Float Turbine Housing 757707-0011 1.01 V-Band V-Band Free Float N
757707-0012 1.15 V-Band V-Band Free Float N
757707-0013 1.28 V-Band V-Band Free Float N
757707-0014 1.01 T4 V-band Free Float Y
757707-0015 1.15 T4 V-band Free Float Y
757707-0016 1.28 T4 V-band Free Float Y

G-Series G42-1450 79mm

Download Section

File Name Link View
Configuration Guide Download View
File Name Link View
Compressor Map Download View
Exhaust Flow Chart Download View
Product Photo Download View
Flange Diagram Download View
Speed Sensor Kit Installation Instruction Download View

G-Series G42-1450 79mm

Compressor Map & Exhaust Flow Chart

Compressor Map

Exhaust Flow Chart

自分の道を選ぶ

興味のある分野・より関連性のある情報を見つけてください。

私は車の所有者です

私は車の所有者です ターボを交換する必要がある方。
お住まいの地域のパートナーディストリビューターはこちら

私はパフォーマンス愛好家です

私はパフォーマンス愛好家です 高性能なエンジンチューニング製品は
こちら

私はOEMの担当者です

ニーズに合った資料請求はこちら

私はディストリビューター/ガレージです

Garrett Turbo Installerとしての認知度を高めたい方はこちら

GARRETT ADVANCING MOTIONに興味があります

私たちの文化についてもっと知りたい方はこちら

つながりを維持する

購読はこちら